Civil engineering services for AEC firms.
We place dedicated remote civil engineers who work under your PE’s direction, in Civil 3D and your existing platforms, so your licensed staff can focus on technical decisions and stamped deliverables.
Trusted by US-based teams · 120+ firms
Vetted civil engineers dedicated to your project's success
Skilled civil engineers for site development, grading, drainage, and stormwater design in Civil 3D or HydroCAD. They work on public infrastructure, transportation, and water projects.
— WHY OUTSOURCE CIVIL ENGINEERING SERVICES
Three patterns we see over and over.
Your civil PEs are doing production work they shouldn't be
When your licensed engineers are drafting grading plans and formatting permit packages, your firm's capacity is capped by their hours. Dedicated production support changes that ratio.
Permit timelines slip because the documentation isn't ready
Civil permit packages require complete, coordinated documentation. When any piece is late, the whole package waits. A dedicated civil engineer owns that production so submissions go out on schedule.
You can't justify a full-time civil hire for your current pipeline
Land development projects have uneven production cycles. We give you qualified talent when the work is there, on flexible terms, without a long-term headcount commitment.
— CIVIL ENGINEERING SITE DESIGN AND PERMITTING SOLUTIONS
Our civil engineering services
Our civil engineers work as part of your project team, under your PE’s direction. They follow your drafting standards, your calculation methods, and your local code rules.
01 / 06
Site grading and earthwork design
Grading plans in Civil 3D with finished elevations, cut and fill volumes, drainage paths, and ADA slopes. They line up with architectural floor levels and structural foundations.
02 / 06
Stormwater management
Detention basins, bioretention areas, swales, and storm drain networks sized to EPA NPDES standards, with hydrology and hydraulic calculations for permits.
03 / 06
Utility layout and coordination
Underground utility layout for water, sewer, storm drain, gas, electric, and telecom. It is matched with grading and paving to keep the required spacing and avoid field conflicts.
04 / 06
Road and access design
Internal roads, driveways, and parking laid out to AASHTO standards, ADA access, and emergency access rules, with alignment plans and paving details for permit and construction.
05 / 06
Permit ready site plans
Full civil document packages for local permit review: grading, drainage, utilities, paving, details, and general notes, set up to match your local checklist.
06 / 06
Erosion and sediment control plans (ESC)
Site-specific SWPPP and ESC plans per local grading ordinances and EPA construction general permit requirements, scaled to your grading limits and phasing sequence.
— ENGINEERING DELIVERABLES
What our engineering professionals deliver
Calculation packages, structural models, MEP coordination sets, civil site plans, and construction documents made by engineering talent placed through BetterPros.
Industrial building
A large industrial project in Santiago, Chile: the structural design and analysis of a 65,000-square-foot warehouse. The frame uses a hybrid system. Precast concrete columns work with long-span steel truss frames to free up interior space and make daily operations easier.
- Location
- Duration
- Created with
- Chile
- 2 months
- SAP2000, AutoCAD
Institutional building
A one-story primary school in Chimbarongo, Chile, with 9,700 square feet. The work covered the full structural design and analysis. The structure uses cold-formed steel (CFS) framing with wood sheathing. The result is light, efficient, and built to resist earthquakes.
- Location
- Scale
- Services
- Chile
- 2 months
- SAP2000, AutoCAD
Agricultural building
A farm utility building in Southwest Ranches, Florida. The work covered the full structural design and analysis of this large hybrid structure. Steel trusses are paired with heavy timber columns, so the space is easy to use and the structure stays strong.
- Location
- Duration
- Created with
- Florida
- U/C
- AutoCAD, Mecawind, RAM
— CIVIL ENGINEERING SUPPORT BY PHASE
Support across every project phase
Concept and preliminary design
Your civil engineer helps your PE review site limits and set the civil design basis before major design time is spent.
Design development
Detailed grading design, stormwater sizing, and utility coordination with the architecture and structural teams. This is when civil workload peaks, and when dedicated support helps the most.
CD and permit documentation
A full civil construction document set: grading, drainage, utilities, roadway, ESC plans, and calculations, ready for permit and your QA checks.
— CIVIL ENGINEERING TOOLS AND PLATFORMS
Software we use
AutoCAD
Revit
Civil 3D
ETABS
Navisworks
Bluebeam
Procore
Tekla
— STRUCTURAL ENGINEERING TALENT PLACEMENT PROCESS
A better experience for engineering firms
We built this process specifically for civil and engineering firms. No generic intake forms, no recruiter who doesn’t understand your discipline.
Tell us what you need
We discuss your project pipeline, the types of civil work involved, the software your team uses, and how the new talent will integrate with your PE's workflow.
We build your shortlist
We match you with two to three vetted civil engineers screened for your project type, Civil 3D proficiency, and US permitting standards familiarity. You receive profiles with experience summaries and examples of grading plans and permit packages they've produced.
Interview and choose
Ask them to walk through a grading approach for your typical project type or describe how they format a permit package for plan check. If none are the right fit, we keep searching.
Seamless team integration
Your new civil engineer gets access to your project files, Civil 3D templates, and communication channels. First day includes a walkthrough of your documentation standards and active project status. Our CS team checks in regularly.
— NEARSHORE CIVIL ENGINEERING ADVANTAGES
Why engineering firms choose BetterPros for civil support
01 / 03
Works under your PE, not independently
Design authority and stamped work stay with your EOR. Our talent adds production capacity inside your engineering process.
02 / 03
Vetted for Civil 3D and US permitting standards
We test for Civil 3D proficiency and verify exposure to AASHTO, EPA stormwater requirements, and local permitting processes. Demonstrating it is what passes our screening.
03 / 03
We handle contracts, payroll, and compliance
Zero legal exposure on your end. You manage the engineering work, we handle everything else.
FAQs: know more about civil engineering services
Can your engineers stamp or seal civil drawings?
No. Our civil engineers provide production support under the direction of your licensed PE or Engineer of Record. All design authority, code interpretations, and stamped deliverables remain with your EOR.
Can they produce permit-ready civil construction document sets?
Yes. Complete civil CD sets including grading and drainage plans, utility plans, roadway and paving plans, ESC plans, and calculations formatted for your permit jurisdiction are the core deliverable for our civil engineering placements.
How does the daily workflow with my PE actually look?
Your civil engineer reports directly to your PE or project lead, aligns on priorities through a short daily check-in, and works through assigned tasks in your Civil 3D environment. Your PE reviews, marks up, and directs, the same dynamic as managing any member of your production team.
Do they understand US permitting requirements and local jurisdiction standards?
Our civil engineers have exposure to AASHTO geometric standards, ADA site accessibility requirements, EPA NPDES construction general permit requirements, and state-specific stormwater regulations. They work under your PE’s direction and adapt to the specific jurisdiction requirements for each project.
Can they coordinate civil drawings with architectural and structural teams?
Yes. Grading coordination with architectural floor elevations and structural foundations, utility coordination with MEP systems, and site plan coordination with the overall project team are standard parts of how our civil engineers work.
What types of civil projects does your talent have experience with?
Residential subdivisions, commercial site development, mixed-use land development, industrial site work, and light infrastructure projects. During our initial call, we ask about your project types and match candidates with relevant experience.
What software does your civil engineering talent work with?
AutoCAD Civil 3D is the primary platform. Our civil engineers also work in HydroCAD, HEC-RAS, StormCAD, InfraWorks, ArcGIS, and Bluebeam Revu. We match to the specific software your firm uses during screening.
Can I bring on a civil engineer for one project and continue from there?
Yes. Most firms start with one civil engineer on a specific project to validate the model. No minimum commitments and no lock-in contracts.
What if the engineer isn't the right technical fit?
We replace them at no additional cost. If the match isn’t right after onboarding, we find someone who fits better.
— START HIRING VETTED CIVIL ENGINEERS
Ready to give your civil PEs more capacity?
Tell us about your current project pipeline and the types of civil work you need support with. We’ll have a shortlist of vetted civil engineers in front of you within 7 to 10 business days. No pitch, no pressure.
- REPLACEMENT GUARANTEE
- NDA + IP ASSIGMENT
- EMPLOYER OF RECORD